Heat pump evaporators
Capacity from 100 l/hour up to 2 m3/hour
Leave a request and our
manager will contact you
Capacity from 100 l/hour up to 2 m3/hour
Leave a request and our
manager will contact you
If it is necessary to evaporate solutions with a capacity of up to 2 t/h, with the possibility of obtaining a salt concentrate at the outlet, it is advisable to use energy-efficient evaporators organized on the basis of the “heat pump” technology.
| Rated power | kW/h | 4 | 8 | 16 | 24 | 32 | 48 | 64 | 80 | 112 |
| Energy consumption | W/liter | 160 | 160 | 160 | 160 | 160 | 160 | 160 | 160 | 160 |
| Dimensions LxWxH | m | 2x1x2.2 | 2.5×1.1×2.2 | 3×1.8×2.6 | 2.7×1.2×2.6 | 3x2x3 | 3.5×1.7×3.5 | 4.5×1.7×4 | 4.5×2.5×4.4 | 5.4×2.5×4.8 |
In the process of evaporating water from the salt solution, it concentrates and passes into a supersaturated state, as a result of which a solid phase crystallizes from it. At the end of the cycle, the compressor stops, the vacuum in the system is released and the bottom valve opens. With the help of a mixing device, the suspension is discharged from the evaporation column, and the condensate is removed from the condensate collector. Then the cycle repeats.
| Distillate performance | liter/h | 20 | 30 | 40 | 60 | 80 | 100 | 125 | 150 | 200 |
| Rated power | kW/h | 5 | 7.5 | 10 | 15 | 20 | 25 | 31.25 | 37.5 | 50 |
| Energy consumption | W/liter | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 |
| Dimensions LxWxH | m | 2.2x1x2.8 | 2.3×1.4×3 | 2.8×1.4×3 | 3×1.6×3 | 3×1.6×3.6 | 3×1.6×3.7 | 3.6×1.7×3.7 | 3.6×1.8×3.7 | 3.8x2x4.2 |
Advantages
Operation of the evaporator only on electricity using deep vacuum
Low energy consumption – about 160 W per 1 liter of evaporated water during concentration
Crystallization is carried out in a cascade of evaporation and crystallization plants
Delivery of equipment in a block-modular design of factory readiness after FAT